REVO Rear Fender Gen.5 Knight Rider LED

$138.00

Newest Hybrid SMD 5050 1W。Flash effect better then active SMD RGB 5050 0.5W
Old SMD is each lamp has 3 bright light-emitting crystal.
REVO Hybrid SMD plus ring crystal around the 3 bright.

SKU: SR-002 Category: Tag:

Description

Rear fender Generation3 Integrated Knight Rider LED Assembly

For M109R/M1800R use only

Feature:

Integrated Turn singal / Hazard / Brake -3 in one design.

Newest Hybrid SMD 5050 1W. Flash effect better then active SMD RGB 5050 0.5W.
Old SMD is each lamp has 3 bright light-emitting crystal.
REVO Hybrid SMD plus ring crystal around the 3 bright.

  • PLUG-AND-GO  “No wiring stuff”
  • REVO Knight Rider lights has 147 modle.
  • 7 color selection: red, blue, green, daisy, pink, purple and white.
  • 21 model patterns in each color with remote control.
  • Auto run and selection mode can be changed in circulation pattern and can also be fixed in a certain model.
  • Available holding on single color and acts as a running light, or turn off pattern, when you hit turn signal light or brake, it will switches to blinker mode.
  • If you won’t ride with the remote, you can set someone model that you like and it would be memory. Then the system will be auto run when you ride next time.
  • Be advised, the Gen.5 is not recommended to used together with Chinese LED Rear Taillight, due to different designed IC board  that could result in  interference.

 

REVO Knight Rider kit has LED strip / Remote control / Wire harness jointer

Wireless Remote Control: Up down left  right  4 buttons

1.      Button D for power switch.

2.      Button B for Auto run pattern and changing effort.

3.      Button C for different pattern, you can choose some kinds circulatory.

4.      Button A for slowdown pattern changing effort.

The kit is unlike Normal RGB LED strip you have seen before. We redesign our Gen I kit that add integrated turn signal/brake/Harad and write new pattern program. It has tradition Knight Rider light red wave scan pattern. Gen I rear fender type available replace stock taillight and make more chopper styling in your 9R. The kit is all plug and play, it plugs into the harness right at the seat, all you have to do is remove the seat and the harness there. No splicing in anything from there the signals, brakes and hazzards all light up. It mounts under the rear fender via double sided tape and little mount bracket that comes with kit, just bolt and stick it.

  • Length: 54cm 48 pcs of  5050 Hybrid SMD RGB
  • Material: Taiwan 5050 Hybrid RGB SMD lamps
  • Brightness: 5000MCD/light
  • 6 months warranty
  • We also do wholesale.
  • We also accept customize for your bike.
  • Come with: 1pc 54cm LED strip & remote control with wire harness (M109R/M1800R use only)

Return policy

After receiving the item, contact seller within
Refund will be given as
Return shipping
14 days
Money back
Buyer pays return shipping

Additional information

Weight 1 kg
Dimensions 30 x 20 x 10 cm